==>> 1U size compact MINI-ITX power supply Model: ATX_W02<<==
Power Supply Overview
Size: 150*81.5*40.3mm
Application: for PC
The Watt number: 200W
Related news letter:
Characteristic.
• conforms to the Flex12V 1 version, rated at 200W (250W)
• efficient
• low ripple noise output
• each output with over voltage protection
• each output voltage with short circuit current protection
• 4CM fan
• high temperature aging test (50 °C)
• life cycle: ≥ 80KH hours
Cable application: 20pin
The main connector 4Pin
+12V CPU 4Pin peripherals
Equipment joint 4Pin floppy drive
Equipment joint
Input specification:
• input voltage: 115V/230V
• frequency: 50/60Hz
• input current: 5A @115Vac 60Hz; 3A @230Vac 50Hz
Output specification:
• maximum power: 250W
• color: Silver
• cooling system: SPEED: 8000RMP (+/-10%)
DIMENSION:81.5*150*43mm
TEMP.AUTO ONTROL:
2500rpm at ~7000rpm at 60.5 °C of 41.7 °C
• noise: 22dB at 7000rpm
• P.G signal: 100-500ms
• keep time: 17ms (min)
• efficiency: 75%
Output:
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
-12V 0.0A 0.5A ±10% 120mV P-P
+3.3V 0.5A 10.0A ±5% 50mV P-P
+5V 0.3A 20.0A ±5% 50mV P-P
+5Vsb 0.0A 1.5A ±5% 50mV P-P
+12V 1.0A 13.0A ±5% 120mV P-P
.+3.3V & +5V total output shall not exceed 80W.
.+3.3V & +5V & +12V1 total output shall not exceed 185W
* Detailed specifications and drawings provided upon request.
Compact MINI-ITX power supply Model: ATX_W04
1.Power AC input characteristics:
Rated input
Enable input
MIN
NOM
MAX
AC220V
voltage(V)
85
110-240
265
50/60
frequency(Hz)
47
50
63
2.DC output voltage range:
Typical value
Vmin
Vnom
Vmax
Error
+3.3V
+3.135V
+3.300V
+3.465V
±5%
+5V
+4.750V
+5.000V
+5.250V
±5%
+12V
+10.800V
+12.000V
+13.500V
±10%
-12V
-10.800V
-12.00V
-13.500V
±10%
+5VSB
+4.750V
+5.000V
+5.250V
±5%
3,DC current output range:
DC output ports
Amin
Anom
Amax
+3.3V
3A
3A
5A
+5V
3A
3A
5A
+12V
1.0A
1A
1.5A
-12V
0.2A
0.2A
0.5A
+5VSB
0.5A
0.5A
1A
4.noise and ripple:
DC output ports
+3.3V
+5V
+12V
+5VSB
noise and ripple
50mV 50mV
120mV
50mV
5.Power output power and efficiency:
output rated power :50W
If the power at 220/50Hz overall loading,the power efficiency is greater than or equal 75%
6.Size:
Dimension (WxLxH):175mm*54mm*42mm
Compact MINI-ITX power supply Model: ATX_W03
Power Supply Overview
1.1 Table 1 Input Electrical Characteristics Overview
Input voltage range: 90Vac to 264Vac
Normal voltage range: 100Vac to 240Vac
Frequency range: 47-63HZ
Max input ac current: 2.0Amax at full load condition
Inrush current (cold start): 40A typ peak,115Vac;60Atyp peak ,230Vac
Efficiency: 85%(230Vac input full load )
Leakage Current: Less Than 3.5mA,230Vac input
Standby Power Loss: =<0.5W,230Vac input
Input Fuse: T2A/250Vac
1.2 Output Electrical Characteristics Overview
1.2.1 Table 2 Output Voltage ,Current & Regulation.
Output Voltage: +12V
Regulation: ±5%
Min. current: 0A
Rated current: 5A
Peak current: 6-8A
Note:* The peak current should be test at other of dc output at Rated load ,And the peak current pulse width within 100ms.
1.2.2 Table 3 DC Output Ripple & Noise.
Output Voltage: +12V
Ripple &Noise(Max.): 120mVp-p
Note:
1) Measurements shall be made with an oscilloscope with 20MHz bandwidth.
2) Outputs shall be bypassed at the connector with a 0.1uF ceramic capacitor and a 10uF electrolytic
capacitor to simulate system loading.
1.2.3 Output Transient Response
Note: Transient response measurements shall be made with a load changing repetition
rate of 50Hz to 10kHz
1.2.4 Table 5 DC Output Hold-Up Time
Output Voltage: +12V
110Vac input: >=10mS
230Vac input: >=10mS
Note: All of dc output at full load.
1.2.5 Table 6 DC Output Overshoot At Turn On & Turn Off
Output Channel: +12V
Output(V): +12V
Over shoot voltage (V): 5%(Turn on),5%(Turn off)
Note: All of dc output current from Min. to Max.
1.2.6 Table 7 Turn on delay
Output Voltage: +12V
120Vac input &Full Load: =<7000mS
220Vac input &Full Load: =<7000mS
1.3 Protection
1.3.1 Table 9 DC output Over Voltage Protection.
Output Voltage: +12V
Max .Over Voltage: 19V
Comments:
Note: The power supply shall be test at max AC voltage (264Vac) and min load or no load.
1.3.2 Table 10 DC Output Over current Protection.
Output Voltage: +12V
Over current MAX: 9A
Comments: Hiccup
2.Isolation
2.1 Table 12
Input To Output: DC500V 15M min(at room temperature)
Input To FG: DC500V 15M min(at room temperatutre)
Output To FG: Annectent
2.2 Table 13
Input To Output: 1500Vac 50Hz 1 minute =<10mA
Input To FG: 1500Vac 50Hz 1 minute =<10mA
Output To FG: Annectent
3,Safety
The power supply shall compliance with the following Criterion:
1),UL60950
2),EN60950
3),GB4943-2001
4,EMC
4.1 EMI
The power supply shall compliance with the following Criteion
1),Conduction Emission
*EN55022,CLASS B
*GB9254-1998
*FCC ClassB
2),Radiated Emission
*EN55022,CLASS B
*GB9254-1998
*FCC Class B
4.2 EMS
The power supply shall compliance with the following Criterion
1),ESD
*GB17626.2-1998/ICE61000-4-2 Level 3
2),EFT
*GB17626.4-1998/ICE61000-4-4 Level 3
3),SURGE
*GB17626.5-1998/IEC61000-4-5 Level 3
4),DIP
*GB17626.11-1998/ICE61000-4-11 Class B/C
5,Environmental Requirement
5.1 Temperature
Operation: 0c,+40c
Store: -20c,+85c
5.2 Humidity
*Operating: from 10% to 90% relative humidity (non-condension)
*StoreL Fron 5% to 95% relative humidity (non-condensing)
5.3 Altutude
*Operating: to 10,000 ft
*Store: to 20,000 ft
5.4 Cooling Method
*Ventilation cooling
5.5,Vibration
*10-55Hz, 19.6m/s(2G), 3 minutes period, 20 minutes each along X,Y and Z axis
5.6,Impact
*49m/s(5G), 11ms, once each X,Y and Z axis
6,Dimension
*145mm x 32mm x 32mm
7,Weight
*(155+/-10g)
8,DC Output Cable Specifiction
UL1007# 4PIN TO 4PIN yellow-black
9,SIZE:
145x28.9mm
