1U尺寸紧凑型MINI-ITX电源供应器 ATX W02 W04 W03 ATX 输出

==>> 1U size compact MINI-ITX power supply Model: ATX_W02<<==

Power Supply Overview

Size: 150*81.5*40.3mm

Application: for PC

The Watt number: 200W

Related news letter:

Characteristic.

• conforms to the Flex12V 1 version, rated at 200W (250W)

• efficient

• low ripple noise output

• each output with over voltage protection

• each output voltage with short circuit current protection

• 4CM fan

• high temperature aging test (50 °C)

• life cycle: ≥ 80KH hours

Cable application: 20pin

The main connector 4Pin

+12V CPU 4Pin peripherals

Equipment joint 4Pin floppy drive

Equipment joint

Input specification:

• input voltage: 115V/230V

• frequency: 50/60Hz

• input current: 5A @115Vac 60Hz; 3A @230Vac 50Hz

Output specification:

• maximum power: 250W

• color: Silver

• cooling system: SPEED: 8000RMP (+/-10%)

DIMENSION:81.5*150*43mm

TEMP.AUTO ONTROL:

2500rpm at ~7000rpm at 60.5 °C of 41.7 °C

• noise: 22dB at 7000rpm

• P.G signal: 100-500ms

• keep time: 17ms (min)

• efficiency: 75%

Output:

Output Voltage Min. load Max. load Load Reg. Ripple & Noise

-12V 0.0A 0.5A ±10% 120mV P-P

+3.3V 0.5A 10.0A ±5% 50mV P-P

+5V 0.3A 20.0A ±5% 50mV P-P

+5Vsb 0.0A 1.5A ±5% 50mV P-P

+12V 1.0A 13.0A ±5% 120mV P-P

.+3.3V & +5V total output shall not exceed 80W.

.+3.3V & +5V & +12V1 total output shall not exceed 185W

* Detailed specifications and drawings provided upon request.

Compact MINI-ITX power supply Model: ATX_W04

1.Power AC input characteristics:

Rated input

Enable input

MIN

NOM

MAX

AC220V

voltage(V)

85

110-240

265

50/60

frequency(Hz)

47

50

63

2.DC output voltage range:

Typical value

Vmin

Vnom

Vmax

Error

+3.3V

+3.135V

+3.300V

+3.465V

±5%

+5V

+4.750V

+5.000V

+5.250V

±5%

+12V

+10.800V

+12.000V

+13.500V

±10%

-12V

-10.800V

-12.00V

-13.500V

±10%

+5VSB

+4.750V

+5.000V

+5.250V

±5%

3,DC current output range:

DC output ports

Amin

Anom

Amax

+3.3V

3A

3A

5A

+5V

3A

3A

5A

+12V

1.0A

1A

1.5A

-12V

0.2A

0.2A

0.5A

+5VSB

0.5A

0.5A

1A

4.noise and ripple:

DC output ports

+3.3V

+5V

+12V

+5VSB

noise and ripple

50mV 50mV

120mV

50mV

5.Power output power and efficiency:

output rated power :50W

If the power at 220/50Hz overall loading,the power efficiency is greater than or equal 75%

6.Size:

Dimension (WxLxH):175mm*54mm*42mm

Compact MINI-ITX power supply Model: ATX_W03

Power Supply Overview

1.1 Table 1 Input Electrical Characteristics Overview

Input voltage range: 90Vac to 264Vac

Normal voltage range: 100Vac to 240Vac

Frequency range: 47-63HZ

Max input ac current: 2.0Amax at full load condition

Inrush current (cold start): 40A typ peak,115Vac;60Atyp peak ,230Vac

Efficiency: 85%(230Vac input full load )

Leakage Current: Less Than 3.5mA,230Vac input

Standby Power Loss: =<0.5W,230Vac input

Input Fuse: T2A/250Vac

1.2 Output Electrical Characteristics Overview

1.2.1 Table 2 Output Voltage ,Current & Regulation.

Output Voltage: +12V

Regulation: ±5%

Min. current: 0A

Rated current: 5A

Peak current: 6-8A

Note:* The peak current should be test at other of dc output at Rated load ,And the peak current pulse width within 100ms.

1.2.2 Table 3 DC Output Ripple & Noise.

Output Voltage: +12V

Ripple &Noise(Max.): 120mVp-p

Note:

1) Measurements shall be made with an oscilloscope with 20MHz bandwidth.

2) Outputs shall be bypassed at the connector with a 0.1uF ceramic capacitor and a 10uF electrolytic

capacitor to simulate system loading.

1.2.3 Output Transient Response

Note: Transient response measurements shall be made with a load changing repetition

rate of 50Hz to 10kHz

1.2.4 Table 5 DC Output Hold-Up Time

Output Voltage: +12V

110Vac input: >=10mS

230Vac input: >=10mS

Note: All of dc output at full load.

1.2.5 Table 6 DC Output Overshoot At Turn On & Turn Off

Output Channel: +12V

Output(V): +12V

Over shoot voltage (V): 5%(Turn on),5%(Turn off)

Note: All of dc output current from Min. to Max.

1.2.6 Table 7 Turn on delay

Output Voltage: +12V

120Vac input &Full Load: =<7000mS

220Vac input &Full Load: =<7000mS

1.3 Protection

1.3.1 Table 9 DC output Over Voltage Protection.

Output Voltage: +12V

Max .Over Voltage: 19V

Comments:

Note: The power supply shall be test at max AC voltage (264Vac) and min load or no load.

1.3.2 Table 10 DC Output Over current Protection.

Output Voltage: +12V

Over current MAX: 9A

Comments: Hiccup

2.Isolation

2.1 Table 12

Input To Output: DC500V 15M min(at room temperature)

Input To FG: DC500V 15M min(at room temperatutre)

Output To FG: Annectent

2.2 Table 13

Input To Output: 1500Vac 50Hz 1 minute =<10mA

Input To FG: 1500Vac 50Hz 1 minute =<10mA

Output To FG: Annectent

3,Safety

The power supply shall compliance with the following Criterion:

1),UL60950

2),EN60950

3),GB4943-2001

4,EMC

4.1 EMI

The power supply shall compliance with the following Criteion

1),Conduction Emission

*EN55022,CLASS B

*GB9254-1998

*FCC ClassB

2),Radiated Emission

*EN55022,CLASS B

*GB9254-1998

*FCC Class B

4.2 EMS

The power supply shall compliance with the following Criterion

1),ESD

*GB17626.2-1998/ICE61000-4-2 Level 3

2),EFT

*GB17626.4-1998/ICE61000-4-4 Level 3

3),SURGE

*GB17626.5-1998/IEC61000-4-5 Level 3

4),DIP

*GB17626.11-1998/ICE61000-4-11 Class B/C

5,Environmental Requirement

5.1 Temperature

Operation: 0c,+40c

Store: -20c,+85c

5.2 Humidity

*Operating: from 10% to 90% relative humidity (non-condension)

*StoreL Fron 5% to 95% relative humidity (non-condensing)

5.3 Altutude

*Operating: to 10,000 ft

*Store: to 20,000 ft

5.4 Cooling Method

*Ventilation cooling

5.5,Vibration

*10-55Hz, 19.6m/s(2G), 3 minutes period, 20 minutes each along X,Y and Z axis

5.6,Impact

*49m/s(5G), 11ms, once each X,Y and Z axis

6,Dimension

*145mm x 32mm x 32mm

7,Weight

*(155+/-10g)

8,DC Output Cable Specifiction

UL1007# 4PIN TO 4PIN yellow-black

9,SIZE:

145x28.9mm